Hello r3v, so I'm having the typical batter drain. Alternator is rebuilt and was charging fine prior to me relocating the battery to the trunk in my vert and changing the light control wiring that short circuited under my dash. I put everything (almost) together and drove my car a few days. Battery died about 3 days later. I charged it up, cleaned the terminals, and after about 5 days of sitting and 2 days of driving it died again. I charged it again, and checked to see what I'm getting back from the alternator and it shows 12.5v. I know it's supposed to be closer to 13.5 but 12.5 should still do right?
I'm wondering if I failed to do soemthing when relocating the battery to the trunk. The other issue could be I messed up something when soldering the new light wiring harness, in which case I will just buy a new one.
Any suggestions or thoughts are apreciated.
Thanks Tim
Sent from my iPhone using Tapatalk
I'm wondering if I failed to do soemthing when relocating the battery to the trunk. The other issue could be I messed up something when soldering the new light wiring harness, in which case I will just buy a new one.
Any suggestions or thoughts are apreciated.
Thanks Tim
Sent from my iPhone using Tapatalk
Comment