installing omega keyless

[jw 325ic]

first off let me say im no electric engineere...
so i just want it for the lock/unlock feature, but the instructions dont tell me much on the sheet or on the link here http://www.r3vlimited.com/board/showthread.php?t=46332.

and this ones alright but still confused..http://zoso.no-ip.org/318i-ke.html

now first off, it has the plug with 4 wires (red black green blue) and 2 wires(blue and green).

red is the 12v power but do you have to put in an inline fuse? can you not connect it to another 12v constant?

black is grounding wire...no worries with this one.

then theres the blue and green. do i use the blue and green from the cluster of 4 wires or 2 wires? what do i do with the other 2 wires not used?

also the input code thing, the #1 #2 #3 #4. do you put all those in the middle?

thanks in advance

[jw 325ic]

okay so after searching on other forums, i found that the red 12v will go to the power antenna or trunk light(light doesnt make sense to me..) and i only use one of the sets of blue and green wires and tape the others off.

[StereoInstaller1]

Do you have a link to a schematic of this unit?

[jw 325ic]

no but i got it figured out after searching on roadfly for a bit. works like a charm.

[StereoInstaller1]

Glad you got it...odd that I cannot seem to find any schematic anywhere.

Luke

[franco90]

Trunk Wire Wire Function Omega Wire (connector)
Brown Ground Black (white)
Green & Black Lock Green (red)
Green & Purple Unlock Blue (red)
See below 12V Power Red (white)