I just installed the Mypushcart keyless entry system from Ebay. I searched the forums before I tried to install it, and found a long thread about doing the install. While the thread was helpful, the wiring explanation left a little to be desired.
What the OP neglected to mention is: The blue and green wires from the 2-pin plug are the ones that have to be spliced into the car's wiring. The blue and green wires on the 4-pin plug aren't used.
Thank you. That is all.
What the OP neglected to mention is: The blue and green wires from the 2-pin plug are the ones that have to be spliced into the car's wiring. The blue and green wires on the 4-pin plug aren't used.
Thank you. That is all.
Comment