Announcement

Collapse
No announcement yet.

e30 analog clock install

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    e30 analog clock install

    i have a 1991 318is and i recently got an analog clock. i took out the obc and tried some wires that i was told would work. the best results i got was the clocks light coming on when the rest of the dash lights were orr. could anyone please help me with the wiring?
    thanks
    curtis

    #2
    This is what I used and had no trouble:


    '91 318is - OBD-II S52 swapped - E30 M3 5-lug - 5x120 BBS RC090 (E39 Style 5) - TCK D/A coilovers 550/700 [SOLD]
    '87 535i - Vacuum brake conversion [SOLD]
    '93 525iT - 5-speed swap - 320k and counting
    '09 328xi - 6-speed

    Comment


      #3
      thanks, thats what i needed

      Comment


        #4
        i tried the write up and the clock didnt do anything. but...if i didnt connect the red/white wire and the brown ground wire then my tach wouldnt work? i did get the clock to light up one time and the needles flickered one time when i had the lights off..?
        im thoroughly confused...

        Comment


          #5
          ^ im with him, followed the instructions and my clocks not getting power and my tach's not working. WTF!

          Comment

          Working...
          X