hello guys. well here's the situation. my wiring harness was replaced, and 90% of it is perfect. the area under the steering column, however, is a disaster. everything seems to work, but a couple things aren't connected and wires are just hanging everywhere. so, if anyone has experience with wiring, knows how everything is supposed to go, or just want to help, pm me or email me at lifeiskaos@gmail.com. i live in monrovia which is close to pasadena. i could drive to you or you could come over. im free all week after 12 noon. i'd greatly appreciate it. i can pay *a little* cash or buy lunch or something, but im very anxious to get it done. thanks so much.
-
-
Are there things on the dash etc that dont work? There are plugs and such that are not connected depending on the options added to the car. Do you have OBC on the car? -
yes i have an obc, and everything works as far as i can tell...Comment
-
Do you have actual "cut" wires or plugs? If the plug is tied to the harness with that bmw sticky cloth tape then its prob a plug for an option. Ive seen other e30's with extra wires hanging from an old aftermarket alarm too. If there are loose wires check if they are crimped on to the oem harness. Crimped wires are usually for an old alarm.Comment
-
nothing is cut. there are a few connectors, and i know two of them are for the door chime, but all the wires are hanging and it's impossible to put the panel back on underneath the steering wheelComment
-
Call TNG, link is in my sig.Comment
Comment