Announcement

Collapse
No announcement yet.

Car alarlm issues, Please Help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Car alarlm issues, Please Help

    The DIY I found I can't really apply to mine so hopefull someone can help me.
    So I was feeling ambitious last night and decided to install my car alarm. I had to stop mid-way through last night as there was an emergency. Fast Forward to this morning....its 830am my battery is disconnected, my back seat is out and I have all of the pieces of the system in my trunk and in my house. Just to add is 30 degrees outside right now.

    I am completely lost....I've added pictures of my setup, could someone please direct me correctly.
    <--Trunk Acuator and wires
    <--sm 3 wire bundle
    <--lg multi wire bundle
    <--md multi wire bundle
    <--closeup of md wire bundle
    <--page of "ok stuv" instructions
    <--next page of "ok stuv" instructions
    <--type of system I have (Prestige APS-25CH)

    (OO≡≡[][]≡≡OO) ///Motorsport
    In this world, things aren't black & white. Its Delphin!

    Parts, Buy Them--> http://picasaweb.google.com/transatl...eat=directlink

    Snowboard & video game stuff --> http://r3vlimited.com/board/showthread.php?t=148645

    Originally posted by Steve92E34
    Your car is breathing my air, and so are you.
    AND you are both still slow

    #2
    OK, first off, where are you trying to install that? Everything you need is in the dashboard, that looks like the trunk.

    Don't even try to install an alarm in the trunk. You require ignition wires, light flash wires, door pin wires and a siren...under dash is the only really logical spot.

    Closing SOON!
    "LAST CHANCE FOR G.A.S." DEAL IS ON NOW

    Luke AT germanaudiospecialties DOT com or text 425-761-6450, or for quickest answers, call me at the shop 360-669-0398

    Thanks for 10 years of fun!

    Comment


      #3
      ok here is what I did before I saw this message....I got everything connected (very sloppily I must add) into the and rear seats. The keyless entry works fine and the flashers flash and I get the blip blip noise when doing it. I don't think the shock sensor is working because I was shaking it and the alarm wasn't going off. The LED and the Valet Button aren't working either(even though I don't care too much for them)

      The keyless works fine, but my the driver's side of my trunk has a few wires strung from the firewall to the tail lights so its a little sloppy but functional

      (OO≡≡[][]≡≡OO) ///Motorsport
      In this world, things aren't black & white. Its Delphin!

      Parts, Buy Them--> http://picasaweb.google.com/transatl...eat=directlink

      Snowboard & video game stuff --> http://r3vlimited.com/board/showthread.php?t=148645

      Originally posted by Steve92E34
      Your car is breathing my air, and so are you.
      AND you are both still slow

      Comment


        #4
        No such thing as a "shock sensor" even if it says shock sensor on it.

        That is an impact sensor, adn thus registers IMPACT, not "shaking".

        So, firmly (but not too firmly) whack your car. That should set it off.

        Now....what are you going to do about triggering the doors? What about that yellow wire, the one that goes to ignition?

        Luke

        Closing SOON!
        "LAST CHANCE FOR G.A.S." DEAL IS ON NOW

        Luke AT germanaudiospecialties DOT com or text 425-761-6450, or for quickest answers, call me at the shop 360-669-0398

        Thanks for 10 years of fun!

        Comment

        Working...
        X