removing stock tweeter

[DrMcDave]

the triangular housing just snaps in and out correct.

after i get that out, whats the best procedure for removing the stock tweeter and grill?

i've got all the stuff ready for my instal,l so tomorrow i will wire the speakers and hopefully do the tweeters, then i just need to finish my speaker pods, which are taking forever.

also what do i use to hold the new tweeters in place? the fit looks to be pretty good.

[chesster6969]

Use something pointy and strong and pry off the metal mesh.Its held in by very small amounts of 10+ year old glue. It will come off easy.

If your not planning to keep the stock tweeters (which I assume) just push the tweeters from the center (front area, what the mesh covers) out towards the rear.

I used a glue gun to hold the tweeters in. You can use silicone or epoxy too, just make sure it cures.
I dremeled off the metal screen on my tweeters to allow them to be mounted how the stock tweeters where. Then I reused the stock screens with a slick half-drop of super glue.

Hope this helps