When I was into car audio this was my favorite amplifier. It's been out of service for last couple of years so I wanted to see how it's made inside. Lost the birth sheet, but it was over 500wrms , and is considered by many as cheaper amp since it was rated at something like 18 or 24watts per channel lol.
Rest of the system was an Alpine 7995 headunit, and image dynamics chameleon cxs62 2ohm components and two image dynamics 12 d2 dvc4 wired in stereo at 2ohm each. This was in a 94 integra hb, interior fully stripped and about 200sq.ft or so sound deadening everywhere upto the firewall from the back... would get plenty loud and sound great w/o any distortion with anything I would throw at it... then was used in my brothers s2k until he lost the 7995 faceplate and blew one of the mids.
Anyway, some pictures. Powered it up with a bench psu.
Front cover removed
pre amp board/section floats on these 4 plastic studs from the main board
switching power supply
main board and the four studs
pre amp board
That is all for now
Rest of the system was an Alpine 7995 headunit, and image dynamics chameleon cxs62 2ohm components and two image dynamics 12 d2 dvc4 wired in stereo at 2ohm each. This was in a 94 integra hb, interior fully stripped and about 200sq.ft or so sound deadening everywhere upto the firewall from the back... would get plenty loud and sound great w/o any distortion with anything I would throw at it... then was used in my brothers s2k until he lost the 7995 faceplate and blew one of the mids.
Anyway, some pictures. Powered it up with a bench psu.
Front cover removed
pre amp board/section floats on these 4 plastic studs from the main board
switching power supply
main board and the four studs
pre amp board
That is all for now
Comment