Euro Clock Wiring

[theanchored]

Hey Friends.

Got a Euro clock and will be replacing my 13 button OBC.

I would like to do the wiring myself and already have the connectors but I can not find a good explanation on what pins from the harness are the correct ones to wire to.

So far this is the only part I am certain of.
Analog Clock Wires
#30 Red/Green +12v (Power)
#31 Brown -12v (Ground)
#31 G Brown/Black -12v (Ground, Illumination)
#58 K Grey/Red +12v (Power, Illumination)

[fastair]

I just purchased one and found this,

https://www.r3vlimited.com/board/forum/e30-technical-forums/car-audio-electronics/58119-analog-clock-install?t=94835

I intend to use this as my guide, hope it works:

[theanchored]

I saw that. There was some discussion about the illumination ground causing issues if you selected the wrong one. That had me wanting to double check!