Trying to re-install factory radio

[Unearth078]

Its quite a bit of a hack job underneath that dash.

i figured out power to the radio as well as remote.

what i have left is the speakers...

Wires i have left

i have two brn/ylw
i have two Blu/gry
blu/blk
blu/red
ylw/red
ykw/blk
...Confused a bit

theres obviously a pattern... any one have the insight to figure it out...

also ill have a nice black clarion with led's that pretty much match aux port for ipod and a bunch of other connectivity, i think xm capable... it will be for sale so pm me if interested

[Unearth078]

ps... i no longer have a fader switch... hmmm

[Unearth078]

but one is going back in.... fuck.

[StereoInstaller1]

1. what year is your car?
2. What year is your deck?
3. Premium sound?
4. Amp still wired in?

Yellow is right, blue is left, black stripes and red stripes are positive (red=front, IIRC) and don'rt forget to use white to turn the amp on if it is there.

Brown/orange is typically amp signal ground.

GL!

Luke

[Unearth078]

ok, the car is a 88is, the deck is from an 87is. The amp is still wired in and if premium sound has the rear deck tweeters and kickers then yes both of them had it... however! the PO had jerry rigged the old HU to new speakers in the kicker. cut up all the wires even tho wasnt necessary. he also had removed the fader switch... so now im grid locked. i have to undo what i established to incorporate the fader. :/ however what you have told me is a god (re)start

[StereoInstaller1]

You might wanna just find a later deck with 4 outputs and not have to fuck with the fader.

[Unearth078]

later decks have a fader built in? that sounds like an ok way to go.. i barely use the radio which is why i keep the stock one in. too look nice. are the later decks the one with that pyramid type knob