Front wheel bearing replacement.

[JUDGE]

What can I expect to spend to do this per wheel?

[Simon S]

Front bearings? Cake walk.


Rear bearings? Fucking waffleswaffleswaffleswaffles whore son of a bitch sucking blood from the mother of all that is sacred on this rock hurtling through space.

[blck325is]

I used the 12pt and was done with both sides in less than 30mins. Great write up!!

[immajackuup]

fwiw - the 6-point impact from Amazon fit with room to spare

www.amazon.com/gp/product/B001Z0U58Q

(i have a weird stigma against 12 point sockets)

12point is crap because it can easily round the bolt/nuts. 6point ftw!!

[z31maniac]

I also wanted to throw another nugget out there after talking with GC Mark (Mark from Ground Control), if they are assembling you new coilovers, have new hubs shipped to GC directly instead of yourself, and GC will install the new hubs free of charge.

This is the route I'll be taking in a few months.

[Simon S]

fwiw - the 6-point impact from Amazon fit with room to spare

www.amazon.com/gp/product/B001Z0U58Q

(i have a weird stigma against 12 point sockets)

[Simon S]

10-4
Thanks

[mightywhitey]

Thats the one I picked up.

[Simon S]

is this the Sears socket you guys are using?

http://www.sears.com/shc/s/p_10153_1...3&blockType=G3

I picked up a 36mm deep-well, 6 point, impact socket from amazon - and it looks like it's gonna be too thick..

[AbeSonic]

Yo Ian. I just might take you up on that offer. But not anytime soon. My rear left is in dire need of a new wheel bearing..

[jintermont]

Yea man just hit me up. I'll snag it from my dads house and you can come by the shop to pick it up.

[mightywhitey]

Did you buy a 36mm socket? Care to let me borrow it to do mine?

[EN318isPDX]

Can someone do a write up for replacing the rear wheel bearing? That would be greatttt.... >.>

I have done my share of rear wheel bearings, you need http://www.harborfreight.com/fwd-fro...ers-66829.html

Ill rent it to you

[jintermont]

There should be a few of them already. Go thru the whole diy section.

Here you go

http://www.r3vlimited.com/board/showthread.php?t=127740

[AbeSonic]

Can someone do a write up for replacing the rear wheel bearing? That would be greatttt.... >.>