Rear air bag install, Front air bag strut build on a e30.

[White325is]

Here is two more cars I did installs on using all airlift products.

[White325is]

how much did that setup cost? bags and all. I'm not happy with my coilovers and am seriously considering this.

Its 2500.00 for that setup.

what shocks are you guys running in the front?

Everyone in here is running the airlift rolling sleeve setup. By the time you purchase front shocks and bags you can buy the proper front setup.

[dillon7]

what shocks are you guys running in the front?

[Wiglaf]

Here is a e30 that I just finished bagging this past week.

how much did that setup cost? bags and all. I'm not happy with my coilovers and am seriously considering this.

[hasback]

what are those wheel specs on that white late model coupe^^^

[White325is]

Thanks buddy. Just picked up a new ride to play with. ��

[buck russell]

Hi everyone. Just saw this thread and a few others. I was looking at the parts listed to make this happen. I found the AH2 rear bags no problems. But I was wondering where to get the 75563 set? Thanks heaps

Contact me (andrew@ORT) and I will get you sorted out, we have them in stock.

Loving the most recent build, Mike.

[o_outkast]

Hi everyone. Just saw this thread and a few others. I was looking at the parts listed to make this happen. I found the AH2 rear bags no problems. But I was wondering where to get the 75563 set? Thanks heaps

[dillon7]

So i'm stuck on manual vs analog.

Basically with analog you can preset your heights and manual you have to sit there and hold all 4 switches to whatever height you want?

[Wiglaf]

nice install. nice to see the spare tire stay in there.

[White325is]

Here is a e30 that I just finished bagging this past week.

[White325is]

I always run the accuair tanks. I like them a lot for e30s.

[dillon7]

what tank setup did you guys go with?

[Magyar_steve]

On my coupe yes. My vert no. And it all comes down to the little things. The nubs on the control arms I cut down to clear. Above the front tire I cut the pinch weld off and weld it shut. Shim the engine up if need be. Every car I bag. Lays front subframe.

You sir are a god, ill pm you for pricing on full kit for my sedan

[White325is]

On my coupe yes. My vert no. And it all comes down to the little things. The nubs on the control arms I cut down to clear. Above the front tire I cut the pinch weld off and weld it shut. Shim the engine up if need be. Every car I bag. Lays front subframe.