DIY: Euro Trim

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • ApexGoblin
    replied
    this is now a viable option that euro trim has jumped to fucken 230 dollars.... fml wtf is that pricing for 4 pieces of plastic....

    Leave a comment:


  • Eufonik
    replied
    your e30 is clean! Dig the side skirts and the lines it adds.

    Leave a comment:


  • E30NJ
    replied
    Looks clean. Nice write up!

    Leave a comment:


  • rcsoundn1
    replied
    Gives new meaning to "mixing stick" great write up

    Leave a comment:


  • Zreberlcoe
    replied
    I really want to do this. Great write up!

    Leave a comment:


  • bsturman92
    replied
    nice write up man! very impressed. will be doing mine within the week, ill post pics

    Leave a comment:


  • RobertK
    replied
    It held up great for 2 years until the kid that bought the car from me wrecked it. Only good pictures I have.






    Leave a comment:


  • JBird
    replied
    Pictures of it on the car?

    Leave a comment:


  • drulle
    replied
    sick... this is my next project.
    OP, thanks for taking your time posting this up

    Leave a comment:


  • thebutcher37
    replied
    SICKNESSS!!!

    this looks ill.. and shoal hold up for a while.

    Leave a comment:


  • Airplanecar8
    replied
    Subscribed, but is this legal?:finger:

    Leave a comment:


  • colorado_cabrio
    replied
    like it

    Leave a comment:


  • MaxBell
    replied
    Hey, this is great! I'm doing this as we speak. The fiberglass is just drying and then on to (eww) kitty hair!

    Leave a comment:


  • travisn
    replied
    Pro-tip: grind/'feather' both sides of the opening. It will give the bondo/fiberglass more surface area to grab onto and it will be less likely to ghost back. Also, let it cure for a day or so before final sanding and priming, no shrinkage!

    and +1 on rough sanding the filler before it hardens

    Leave a comment:


  • NightfoxCT
    replied
    Great write-up,plan on doing this once it warms up outside a tad.

    Leave a comment:

Working...