Announcement

Collapse
No announcement yet.

Tuner shops familiar with Megasquirt and M42's within 2 hrs of Baltimore , MD.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Tuner shops familiar with Megasquirt and M42's within 2 hrs of Baltimore , MD.

    Doing a turbo m42 build and I really wanna take it somewhere that has experience with megasquirt and m42's. The reason being that if they understand megasquirt and know how it works my tuning time will be cut down. Also I don't wanna take it to a honda or subura shop rather have someone who knows the m42 engine good.
    So far from searching on here and other forums I have found moore automotive the only close shop. Of course there is VAC but they said they can do it but there not that familiar with megasquirt or with m42's. SSI has a dyno and offer tuning but I'm not sure how much they know about megasquirt. I should have everything together and running in a week or two. This is the only part of the build I don't wanna try to do myself. I have a car trailer and am willing to drive up to 2hrs to get the tune dialed in perfect. Any help is greatly appreciated. Thanks.
    My Multi car part out. Need a part? Pm me...
    http://www.r3vlimited.com/board/showthread.php?t=193051

    Need 24v swap parts? How about a LSD? Plastic Bumpers? Or anything else click here...
    http://www.r3vlimited.com/board/showthread.php?t=215044

    Have you done business with me? If so leave me feedback here...
    http://www.r3vlimited.com/board/showthread.php?t=188307


    #2
    may I suggest.

    http://www.maximumpsi.com/

    Comment


      #3
      I am gonna call them tomorrow. Thanks man.
      My Multi car part out. Need a part? Pm me...
      http://www.r3vlimited.com/board/showthread.php?t=193051

      Need 24v swap parts? How about a LSD? Plastic Bumpers? Or anything else click here...
      http://www.r3vlimited.com/board/showthread.php?t=215044

      Have you done business with me? If so leave me feedback here...
      http://www.r3vlimited.com/board/showthread.php?t=188307

      Comment


        #4
        im in the same boat! i spend 4 months looking for a tuner vac wanted 1500 to tune my m20 with megasquirt. the only people that had a resonable offer was J-K-Tuning. good luck i plan on taking my car up there in the next few months

        Comment


          #5
          Originally posted by euro2fast4u View Post
          im in the same boat! i spend 4 months looking for a tuner vac wanted 1500 to tune my m20 with megasquirt. the only people that had a resonable offer was J-K-Tuning. good luck i plan on taking my car up there in the next few months
          I am gonna try to use the original tune that was on the previous owners car. It was a stock engine same as mine. Then try to fine tune with another driver in the car. Once I build my other engine then I'm gonna pay someone to do it. For this time around I should just save my money for the tune with the built motor.

          What kind of numbers do you think your making?
          Ever go to Cecil Co dragway? I wanna go up there once I get this setup running good. Just to see how fast an m42 can be on stock motor. Then compare with the built engine and more boost.
          My Multi car part out. Need a part? Pm me...
          http://www.r3vlimited.com/board/showthread.php?t=193051

          Need 24v swap parts? How about a LSD? Plastic Bumpers? Or anything else click here...
          http://www.r3vlimited.com/board/showthread.php?t=215044

          Have you done business with me? If so leave me feedback here...
          http://www.r3vlimited.com/board/showthread.php?t=188307

          Comment


            #6
            yup i live 5 minutes from there but my car gets the maluka every time i head over there eerything goes wrong that can go wrong so i usually just play on the streets.

            Comment


              #7
              def. go to moore automotive i was just there today. they tuned my car about 15 pulls. the tuner (chris) is very knowledgeable about megasquirts and efi in general. not to mention you will not get your car tuned for cheaper. trust me i shopped around.

              Comment


                #8
                Thanks I read on some of the other forums about them being good. How many hours did it take? Can you pm me what they charged? What kind of numbers was your car making?
                My Multi car part out. Need a part? Pm me...
                http://www.r3vlimited.com/board/showthread.php?t=193051

                Need 24v swap parts? How about a LSD? Plastic Bumpers? Or anything else click here...
                http://www.r3vlimited.com/board/showthread.php?t=215044

                Have you done business with me? If so leave me feedback here...
                http://www.r3vlimited.com/board/showthread.php?t=188307

                Comment


                  #9
                  i was there for 4 hours. it really didnt take that long though. i made about 15 pulls, and we took a lunch break and two other breaks to let the car cool down. the shop was really slow i think i was their only customer today so they took their time. car made 441hp 427tq. build thread for more info on my car and dyno video on last post:

                  http://www.e30tech.com/forum/showthread.php?t=78531

                  Comment


                    #10
                    Holy shit! Just read the thread. I am gonna call him as soon as I have the car running. Thanks man.
                    My Multi car part out. Need a part? Pm me...
                    http://www.r3vlimited.com/board/showthread.php?t=193051

                    Need 24v swap parts? How about a LSD? Plastic Bumpers? Or anything else click here...
                    http://www.r3vlimited.com/board/showthread.php?t=215044

                    Have you done business with me? If so leave me feedback here...
                    http://www.r3vlimited.com/board/showthread.php?t=188307

                    Comment

                    Working...
                    X