Ms Req_fuel problem.

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • dirty thirty
    replied
    How do i upload the msq file?
    Tryed to attach file but it keeps telling me its invalid.

    Leave a comment:


  • Kvasi
    replied
    Originally posted by dirty thirty
    I should upload my hole tune for you guys to look at!

    Thats what you would do if you shared the msq file. It would make me able to open it in tunerstudio and check out all your settings.

    Leave a comment:


  • dirty thirty
    replied
    I should upload my hole tune for you guys to look at!
    What dattalogger should I use ?

    Leave a comment:


  • Kvasi
    replied
    Originally posted by dirty thirty
    sorry but what is msq?
    Your map is stored on the computer as a .msq file.

    Leave a comment:


  • dirty thirty
    replied
    sorry but what is msq?
    Originally posted by LowR3V'in
    Post your msq and a datalog for real help.

    I'm going to just start guessing.
    you didn't set your wideband correctly
    it's lean because all you've seen so far is warmup

    The engine can't run at 22afr. It's something with a settings, or 1 or 2 injectors arn't plugged in.

    Leave a comment:


  • dirty thirty
    replied

    Leave a comment:


  • dirty thirty
    replied
    yep i did this !!!
    Originally posted by Kvasi
    Tools -> calibrate afr table -> LC-1 default
    Basic setup -> ego control -> Single wideband

    Leave a comment:


  • dirty thirty
    replied
    just had my injector pulsewidth 1 and 2 blank out of me go from 1.9 -2 ms to 0 and back up a couple times ?

    Leave a comment:


  • Kvasi
    replied
    Originally posted by dirty thirty
    what would be the proper setting for my wideband, I have a lc-1 ?
    Tools -> calibrate afr table -> LC-1 default
    Basic setup -> ego control -> Single wideband

    Leave a comment:


  • dirty thirty
    replied
    what would be the proper setting for my wideband, I have a lc-1 ?

    Leave a comment:


  • Kvasi
    replied
    Still only at idle?

    An easy route is to cash out full version of tunerstudio and use autotune, its actually real good. Just remember to just use it with that warm engine that the warmup is off, and turn off acc enritchment and overrun fuelcut.

    Leave a comment:


  • LowR3V'in
    replied
    Post your msq and a datalog for real help.

    I'm going to just start guessing.
    you didn't set your wideband correctly
    it's lean because all you've seen so far is warmup

    The engine can't run at 22afr. It's something with a settings, or 1 or 2 injectors arn't plugged in.

    Leave a comment:


  • dirty thirty
    replied
    Nope with these tables it's still running lean

    Leave a comment:


  • LowR3V'in
    replied
    Cool, so you got it figured out?
    up in the 195kpa you're using too much fuel
    try to target 12afr. It's just wasting fuel and reducing power.

    Leave a comment:


  • dirty thirty
    replied
    ve table

    Leave a comment:

Working...