Ms Req_fuel problem.

[LowR3V'in]

Cool, so you got it figured out?
up in the 195kpa you're using too much fuel
try to target 12afr. It's just wasting fuel and reducing power.

[dirty thirty]

Nope with these tables it's still running lean

[LowR3V'in]

Post your msq and a datalog for real help.

I'm going to just start guessing.
you didn't set your wideband correctly
it's lean because all you've seen so far is warmup

The engine can't run at 22afr. It's something with a settings, or 1 or 2 injectors arn't plugged in.

[Kvasi]

Still only at idle?

An easy route is to cash out full version of tunerstudio and use autotune, its actually real good. Just remember to just use it with that warm engine that the warmup is off, and turn off acc enritchment and overrun fuelcut.

[dirty thirty]

what would be the proper setting for my wideband, I have a lc-1 ?

[Kvasi]

what would be the proper setting for my wideband, I have a lc-1 ?

Tools -> calibrate afr table -> LC-1 default
Basic setup -> ego control -> Single wideband

[dirty thirty]

just had my injector pulsewidth 1 and 2 blank out of me go from 1.9 -2 ms to 0 and back up a couple times ?

[dirty thirty]

yep i did this !!!

Tools -> calibrate afr table -> LC-1 default
Basic setup -> ego control -> Single wideband

[dirty thirty]

http://youtu.be/f2SZg1KHmo4

[dirty thirty]

sorry but what is msq?

Post your msq and a datalog for real help.

I'm going to just start guessing.
you didn't set your wideband correctly
it's lean because all you've seen so far is warmup

The engine can't run at 22afr. It's something with a settings, or 1 or 2 injectors arn't plugged in.

[Kvasi]

sorry but what is msq?

Your map is stored on the computer as a .msq file.

[dirty thirty]

I should upload my hole tune for you guys to look at!
What dattalogger should I use ?

[Kvasi]

I should upload my hole tune for you guys to look at!

Thats what you would do if you shared the msq file. It would make me able to open it in tunerstudio and check out all your settings.

[dirty thirty]

How do i upload the msq file?
Tryed to attach file but it keeps telling me its invalid.

[LowR3V'in]

.ZIP it.
Also attach a good log showing the problem.