Looking for a Good streetable MS tune for my Sons setup

[MonkeyMadness]

hello
Looking for a streetable tune for my sons setup.
this is what we got.

MS3.2.1
30lbs injec
Stock ign.
M20 stroked 2.8 w/M52 crank, 130mm rods, b25 pistons cut down.
272 shrick cam
MLS with ARP top and Bottom
524TD manifold w/ MMP adapter kit
52 trim turbo
2.5" from turbo to tip.

Not looking for anything crazy Maxed out tune, just a proven streetable tune for a Daily Driver

thanks

[sayed ali]

Why 130mm rods?

[MonkeyMadness]

Cause the m52b28 crank has a 84mm stroke.
84mm rod stroke x 84mm bore = 2.8 with 9.5:1cc but we're running a thicker mls to drop the cc down to 9.0:1
It runs really strong, we're very happy with it we just need a good tune so I don't have to worry everytime he goes for a drive..

[sayed ali]

I'm running the m52b28 crank with stock b25 rods (135mm) and stock b25 pistons (cut down) and 885 head (slightly ported)

I don't know about the compression but I'm running the stock hg + O-ringed block ..

Still few thing to start it up :)

I'm sorry for interruption, good luck!

[mccor023]

hello
Looking for a streetable tune for my sons setup.
this is what we got.

MS3.2.1
30lbs injec
Stock ign.
M20 stroked 2.8 w/M52 crank, 130mm rods, b25 pistons cut down.
272 shrick cam
MLS with ARP top and Bottom
524TD manifold w/ MMP adapter kit
52 trim turbo
2.5" from turbo to tip.

Not looking for anything crazy Maxed out tune, just a proven streetable tune for a Daily Driver

thanks

You're a cool dad Monkey, my dad would think you were speaking a foreign language if he read your post.

[MonkeyMadness]

Thank you :D

Sent from my LG-LS970 using Tapatalk 2