msd coil

[kev kev]

hey whats up guys anyone know how to wire up the msd coil with msd base to whodwho megasquirt and by the way does whodwho megasquirt come with
built in ignitor for wasted spark any help welcome.

[e30m3s54turbo]

This might help.

http://www.mye28.com/viewtopic.php?t=68448

[kev kev]

so all i need is power to the coil and signal to the mega squirt right

[blood_sweat_&_gears]

I'm going through the same thing right now. I have the MSPNP2 not the whodwho but i do have the MSD coils on a GM base. According to the guys at DIYAuto the MSD coils do not have igniters in them and require a quadspark to function. This may or may not be the case for you. I would message WhodWho and ask him. He usually gets back to me within the day.

[whodwho]

so all i need is power to the coil and signal to the mega squirt right

Sorry I missed this first day posted, i'm sure you are probably past it now but that is a good link that Raul posted and yes your ECU had the extra ignitors built in.

Power to the coilpack(from the old coil is good) and signals from the coilpack to the DB15 connecter on the ECU. The pins are paired up, you can run two wires each channel or bridge them and run a single wire each.

Here is a pinout -

I'm going through the same thing right now. I have the MSPNP2 not the whodwho but i do have the MSD coils on a GM base. According to the guys at DIYAuto the MSD coils do not have igniters in them and require a quadspark to function. This may or may not be the case for you. I would message WhodWho and ask him. He usually gets back to me within the day.

Correct, those coils don't have igniters built in but his ECU does