Announcement

Collapse
No announcement yet.

i need info on MegaSquirt......

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    i need info on MegaSquirt......

    i want to get a megasquirt system for my soon to be turbo e30 , but i need some help, what do i need to purchase to get ms to run my fuel and spark, iknow i need a ms unit and wiring harness,,,what about a relay block??? what else do i need to get it up and running????

    #2
    blind faith

    Comment


      #3
      www.msefi.com - read, read, read!!!

      Comment


        #4
        Are you decent with wiring? Know how relays work? If so, I would reccomend you dont bother with the relay board.

        Otherwise, for spark you will need, depending on how you want to set it up, not much else. Unless, of course, you want to run wastespark or an MSD box, or.... Whatever else.

        The basic stuff, (single coil, 60-2 wheel, fuel, etc.) the regular MS3 can do. Beyond that, you will need more setup and stuff.

        Ben

        Comment


          #5
          yea read and read and read..

          you'll need to wire up a relay for fuel pump, Air intake temp, coolant temp sensor and some other things cant think of right now

          Comment


            #6
            ms1 v2.2 will decode the wheel, stock clt sensor should be ok, a open gm iat sensor, must buy a wideband, must, nb o2 is only good to like 4psi, if you can put a dizzy inthere somewhere you can mod it to give the ms phase for the cam and it can do cop 4cyl, ms2 can do cop 6cyl
            9.8:1 2.3l
            msns-e/lc1/evc3
            48mm t3/t4
            3" turbo-tail
            npr
            www.hybridturbosales.com

            sigpic

            Comment


              #7
              the v2.2 board actually doesn't have the wheel decoder circuit only the v3.0 and up boards
              85 325e 2.7 ITB'd stroker

              Comment


                #8
                we have a v2.2 cop 16v volvo in the ATL, just add a little circut, no biggie
                9.8:1 2.3l
                msns-e/lc1/evc3
                48mm t3/t4
                3" turbo-tail
                npr
                www.hybridturbosales.com

                sigpic

                Comment


                  #9
                  Last edited by benflynn; 02-06-2007, 09:50 AM.
                  9.8:1 2.3l
                  msns-e/lc1/evc3
                  48mm t3/t4
                  3" turbo-tail
                  npr
                  www.hybridturbosales.com

                  sigpic

                  Comment


                    #10
                    ya correct a extra circuit has to be built the way you worded the first post sounded like it was built into the main board.
                    85 325e 2.7 ITB'd stroker

                    Comment


                      #11
                      your right, i guess in my head i no longer make the distinction
                      9.8:1 2.3l
                      msns-e/lc1/evc3
                      48mm t3/t4
                      3" turbo-tail
                      npr
                      www.hybridturbosales.com

                      sigpic

                      Comment

                      Working...
                      X