Building my own Muffler, would like your input..

[MonkeyMadness]

Would you build the muffler to M42 specs? Single pipe, x.xx" size piping, etc...? I'd be interested in that.

Sure we could look into that..

[5ickride]

Nope!

but maybe just a muffler...

Would you build the muffler to M42 specs? Single pipe, x.xx" size piping, etc...? I'd be interested in that.

[MonkeyMadness]

Id be interested in a cat back for my 318 m42...any chance?

Nope!

but maybe just a muffler...


-------------------------------
Fyi in the works

Devon.818
Shipped

Kalib0y
Building

Erik325i
Pending ???

Cactusjacks1
Pending :D

Brandon12v
In talks

[5ickride]

Id be interested in a cat back for my 318 m42...any chance?

[MonkeyMadness]

So how many people would need interested in this to make it worth your while? Bc aside from what we discussed in PM, I think you and I will be doing some more business here in the near future. ;) If possible, I'd be interested in the same glasspacks you're running but I'd also like incorporate a 'flapper' mod for open pipes at WOT pre-muffler.

Like a Cut off? Or a spring held flapper that opens with a certin amount of back presure <-- this wouldn't be needed with my exhaust..

See my exhaust are a sraight through pipe, it a 2" pipe with louvers
so at WOT believe me theres nothing in the way, and the sound is awesome!

The set Devon.818 is getting is a full race perferated setup
theres nothing stoping those from opening up like a wailing banshee
I'm excited to here how they sound on a nice sorted M20

I've had quite afew pm's about this and have commited to a few
but not looking to do many of these, This was more of an exercise.

[devon.818]

SO effing stoked.
mine gets here in TWO days.
gotta get rid of this ricer and pick up a special e30 i found in some dudes wharehouse...

[Brandon12V]

So how many people would need interested in this to make it worth your while? Bc aside from what we discussed in PM, I think you and I will be doing some more business here in the near future. ;) If possible, I'd be interested in the same glasspacks you're running but I'd also like incorporate a 'flapper' mod for open pipes at WOT pre-muffler.

[325ix]

I really like the look of the straight tips. I wish I was in the market for a new exhaust.

[MonkeyMadness]

Should have pic's of sraights mocked up tomorrow..
tips and bodies..

[MonkeyMadness]

perfect!

Pm'ed :up:

[kalib0y]

perfect!

[MonkeyMadness]

2 or 2.5in dual inlet on a Dinan muffler. Im looking for something like your set up with non-slanted tips

tips like this?

:Warning this is just a mock up and are 2.875" O.D. and a 2" I.D. :

[801coppertop]

God Damnit I want!!! Subscribed for updates!!

[kalib0y]

2 or 2.5in dual inlet on a Dinan muffler. Im looking for something like your set up with non-slanted tips

[MonkeyMadness]

i would be down. do you have other tip options?

Not sure how it would sound on a bigger 24v but would love to try..
what are you running now for exhaust?
Is your muffler a duel inlet or single? and size?

Tips.. What are you looking for?
I'll see what I can dig up..