Rear Muffler for a Stroker

[jules325i]

Most recent video same setup.

Cant wait to fit mine next week!
should be real loud combined with my miller PSIK

[supkev]

Rear Muffler for a Stroker



Most recent video same setup.

[supkev]

Thankyou so much for posting this.

My mind is made up.

No problem mate I'll be modifying it a bit with headers and high flow cat.

[jules325i]

For anyone curious what it sounds like. I am waiting to put my shorty headers on but I have stock manifold with 2.5 straight pipe after cat to this muffler. I think I've been approached many times how good it sounds despite my tiny exhaust leak. I think it sounds more throatier with the stock cat and manifold.




Sounds like this on the road





Sounds like this from the outside







and another clip.

http://statigr.am/viewer.php#/detail...99197_12211434

Thankyou so much for posting this.
My mind is made up.

[supkev]

For anyone curious what it sounds like. I am waiting to put my shorty headers on but I have stock manifold with 2.5 straight pipe after cat to this muffler. I think I've been approached many times how good it sounds despite my tiny exhaust leak. I think it sounds more throatier with the stock cat and manifold.




Sounds like this on the road





Sounds like this from the outside







and another clip.

http://statigr.am/viewer.php#/detail/538062935974899197_12211434

[supkev]

I have the 14815 exhaust setup mine is more a deep tone no rasp at all Ill post my video here in a bit.


Sent from my ASUS Transformer Pad TF300T using Tapatalk

[shadowracer]

I would say the bigger the tails off of the muffler the deeper the sound...
On a side note a friend of mine has an eisenmann race muffler on his M30 swapped 325is with high flow cats, and in my opinion as well as others, the car sounds like total crap when he gets on it. Idle sounds good but that's it, anything more than an idle is so raspy that it takes away from the car.

[LagunaSecaBlue]

Thrush Welded. Great Muffler and great build quality.

[M44schnell]

Personal preference i would not go 14815, had it on my eta and it was fine but with long tubes and a resonator + 2.5in pipe it rasps like crazy in the mid range. Sounds great outside the car but still to much rasp (rice) for me.

[6SPD]

I'm on the same hunt... Having a 2.8 dropped in. The goal is long tube heads to a y-pipe to 2.5 inch pipe then a single muffler. Borla is a good contestant for me too. I'd love a supersprint or an eisenmann.

[jules325i]

Borla anything

Thanks ill have a look.

[ak-]

Borla anything

[jules325i]

Had a custom exhaust fitted about a year ago - Extractors through high flow cats then a long/large rear muffler it's a twin system all the way and i think the diameter is just under 2 inch per pipe.

My problem is its far to quiet and raspy, im thinking about changing the rear muffler.
My question would i lose performance if i put a magnaflow 14815 with a y peice just before it, will that cause to much back pressure.
Or can anyone recommend a nice muffler with twin in and out that has a nice deep bark.