I made dis! (3" exhaust sound inside)

[Loupoz]

Just finished my stainless exhaust on my touring, pretty happy with the results


Its made from Stainless eBay headers into 2,25" pipe, into 3" collector. Magnaflow 3" cat, Simons 3" mufler, and Borla XS 3" into 2 x 2,5" tips.

[TheTacoMan]

Just finished my stainless exhaust on my touring, pretty happy with the results.


Its made from Stainless eBay headers into 2,25" pipe, into 3" collector. Magnaflow 3" cat, Simons 3" mufler, and Borla XS 3" into 2 x 2,5" tips.

Fixed if for you.

[Loupoz]

Thanks i coulden figure it out :P

[TheTacoMan]

Sounds great!

[Loupoz]

Heres some build pics

[NYSE30]

Which eBay headers did you use and was fitment good?

[dirtbag30]

quality work.

[Loupoz]

Which eBay headers did you use and was fitment good?

I got no idea, i bought 'em used, but its the most regular ones idd guess. Fitment is good, except the front one touches the subframe when you rev the engine. Im planning to fix that with a subframe reinforcement kit though, just to raise it those 3 mm.

quality work.

Thanks :D

[AwakenNoMore]

looks like a 24 valve engine in there, which one?

[Loupoz]

looks like a 24 valve engine in there, which one?

Ohh yeah, its an M52B28. And its a euro version ofc, so its alu block. Its with beisan renovated vanos, and M50 intake conversion.

[boosteddirty]

Now that's quality. Any scraping issues? Are you running with the stock suspension or coilovers?

[Loupoz]

Now that's quality. Any scraping issues? Are you running with the stock suspension or coilovers?

It havent seen the floor since i made the exhaust.

It probaly will this weekend with 30 mm H&R lowering springs and 17x8,5 inch BBS CH's with 225/45r17 tires. Ill update with more pictures when it hits the ground.

[Loupoz]

Ive got loads of ground clearence, actually think i got more than i did with my stock exhaust, but its hard to tell, since i raised the car a bit, and got bigger wheels.

heres some pics (sorry for the shitty cellphone quality):









And 2 shots of the wheels :D



And yes, the fronts rubs, a lot :( Need smaller tires, also not sure if my M3 spindles are from a 3.0 or 3.2.

[Luke_M]

Looks great! How big is that center muffler/cat? I'm trying to figure out if a 9" wide x 4" tall turbo muffler will fit the center section. Or even a 9.75" wide x 4.25" tall.

[Loupoz]

Looks great! How big is that center muffler/cat? I'm trying to figure out if a 9" wide x 4" tall turbo muffler will fit the center section. Or even a 9.75" wide x 4.25" tall.

Sorry for the late reply. Its 140 x 220 mm, which is approximately 8,5 x 5,5 inches. The cat is way smaller, Idd guess around 4-4,5".