Can I use stock exhaust hanger kit with Vibrant?

[BMWManiac]

I purchased a vibrant exhaust for my M20, but I wasn't sure if the stock hangers would work?

It is the vibrant streetpower 1149 oval muffler. I already have it installed by my local muffler shop, but they only used one of the hangers and welded it kind of together on one side. My exhaust doesn't use either of the two other hangers.

While the mounting is pretty solid, I can hear when I drive that it is not as solid as I would like. I am not sure if I can get away with just purchasing the rubber donut near the diff and have the shop weld another hanger off the exhaust and that will take care of it, or, just purchase the stock hanger kit and both rear mounting points/rubber donuts

[f4tj0n]

bump. I need to know this as well.

[BMWManiac]

I can take some pics for you....I know I used one hanger and the donut on the muffler itself, but I don't think I used the donut/hanger on the side closest to the wheel, or the donut/mount near the subframe. I was also using the mounting kit for a scorpion exhaust, which is bigger.....

Come to think of it, the stock hangars may in fact work for the muffler itself.