Cast turbo manifold

[Chrisv006]

Anyone ever try one of these?


Maybe upside down with a 45 degree adapter between it and the turbo?

[The Humjet]

If you have a 24v I can't see why it won't work. I dont know about it mounted in a bottom mount style but I guess with a 24v engine you won't have to worry about oil filters getting in the way

[Good & Tight]

It does fit, but you will need to notch the subframe, get a custom engine arm, and run a oil scavenge pump, not to mention the intercooler piping will be difficult.

In the end it would be cheaper to buy a top mount, cleaner install less work and fabricating.

[The Humjet]

^^^Yeah just buy his

[Chrisv006]

It does fit, but you will need to notch the subframe, get a custom engine arm, and run a oil scavenge pump, not to mention the intercooler piping will be difficult.

In the end it would be cheaper to buy a top mount, cleaner install less work and fabricating.

Those mods would needed to flip the manifold over and run it as a top mount?

[Good & Tight]

Those mods would needed to flip the manifold over and run it as a top mount?

For bottom mount fitment.