If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Been thinking about this more lately. Im heading back to wyo soon so the car will be at about 5200ft above sea level. So instead of using 14.7 i would use 12.27, correct?
Leaving this here because i did the math and dont want to lose it..
PR = 12.27 psi + 20 psi/ 12.27 psi = 2.63
(1.8 L x 2500 RPM x 90 VE x 2.63 )/5660 = 188.18 / 14.5 = 12.9lb/min
(1.8 L x 3500 RPM x 100 VE x 2.63 )/5660 = 292.73 = 20.1lb/min
(1.8 L x 6000 RPM x 110 VE x 2.63 )/5660 = 552.02 = 38lb/min
EDIT: Also, why do i see some maps that are plotted where the pr goes up and then yours where it stays flat?
EDIT:EDIT: I think i found my answer here but if anyone wants to clarify feel free.
Comment