My low milage turbo Prep

[edsel1134]

Only on start and after revving it smokes a bit

[Pootis]

What color?

[edsel1134]

Really light but looks blackish smells of gas and has missfire at 2k I can hear it mostly but barely

[einstein57]

I'm at 18psi on metric blues. A resused set at that. Over 20k miles clocked.

[edsel1134]

I'm at 18psi on metric blues. A resused set at that. Over 20k miles clocked.

Yeah I'm almost done with my list..after that post links and part numbers as you please.. Any insight is welcome

[edsel1134]

so i am debating the metric blues or ARP can some one post links where they have ordered them seen arp from 220-500$ O_o

[mr2peak]

Jack it up a few inches and let it idle. Better check out that hissing noise asap if you're smelling fuel. Don't want it to turn into a Ferarri.

[edsel1134]

Gasket it in.. And I'm going to use the metal line cutter and remove the crumpled portion.. Maybe causing to much pressure and forcing a leak some where else

[edsel1134]

Head gasket came in •

[edsel1134]

Brakes fixed :) just need to bleed and replace fluid :)

[edsel1134]

[AbsorbantNut]

You could do what I did if you wanna make a quick spooling 250 on the cheaper side of things....It's 24lb injectors, a volvo turbo & intercooler, and a retuned stock chip. It took a little fiddling with the afm but it's running great. Stock hg and bolts, although I will probably switch to ARPs as soon as I can.

[edsel1134]

You could do what I did if you wanna make a quick spooling 250 on the cheaper side of things....It's 24lb injectors, a volvo turbo & intercooler, and a retuned stock chip. It took a little fiddling with the afm but it's running great. Stock hg and bolts, although I will probably switch to ARPs as soon as I can.

Pm
Me deatails

[AbsorbantNut]

Pm
Me deatails

Just ask what you want to know, details are in my build thread.

[edsel1134]

Specs.. Parts list or part numbers :) I already have head studs.. How mch boost can that turbo hold? Possible to get 300hp safely out of it?