Turbo manifold

[CLASH]

Have any one here used this turbo manifold from CX racing?

http://www.cxracing.com/mm5/merchant.mvc?Screen=PROD&Store_Code=CXR&Product_Code=MF-BMW-E30&Category_Code=MFBMW

is it good enough for for 8-12 psi ?




thanks

[LowR3V'in]

I had one but it cracked at the turbo flange. Little hairline crack.

[sayed ali]

I don't recommend that ..

[jaywood]

It's a well designed manifold that uses sub-par materials. Reinforce it and you'll be fine.

[CLASH]

Does it has any issue for fitment?


Thanks

[LowR3V'in]

Cut the flange in half.
In the old days people would drill out the holes but just
cut the flange in half and it will give you play.

[CLASH]

Cut the flange in half.
In the old days people would drill out the holes but just
cut the flange in half and it will give you play.

do you have any picture for your project? just want to see how you did it



Thanks

[TheTacoMan]

Cut the flange in half.
In the old days people would drill out the holes but just
cut the flange in half and it will give you play.

I did this as well as drilling the holes out a bit, manifold holds up fine otherwise.