supercharged e30 s50 powered need some help

[escortdriverfornow]

Ok so I bought a supercharger (vf engineering) kit i installed on the motor now the only problem I'm having is that the pulley for the blower and top radiator line up perfectly. Which is a problem. Do I need to get a different radiator and if so what brand? Any help would be appreciated.

[Q5Quint]

pics? I would assume if a company made the thing it would fit properly?

[kingston]

pics? I would assume if a company made the thing it would fit properly?

The problem is that they make them for the S50 in an E36, and the E30 bay is shorter. You will likely need to take the radiator to a radiator shop and have a custom setup done on it. Shouldn't cost much to have them put on a 90 degree bend.

Good luck!

[L8 apexr]

The upper outlet simply needs to turn 90 degrees as tight to the body of the rad as possible while allowing the hose and clamp on.Of course its easy if you have an aluminum rad,not so much if your running a stock rad....which you probably swap out if you are anyways.

I have a powerdyne set-up to install in mine starting in a couple weeks,I need to do the same thing.