Change spark plugs for 12psi?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • DJLimes
    Member
    • Dec 2013
    • 49

    #1

    Change spark plugs for 12psi?

    Going from stock n/a to turbo'd at 12psi, and I remember reading that colder plugs would be ideal. What should I run for my setup? Having some rough starts so they're in need of a change anyways.
    87' 325is Wife
    09' cbr600rr Mistress
  • speedracer 2002
    Grease Monkey
    • Dec 2013
    • 359

    #2
    Ngk bpr7es

    Comment

    • sayed ali
      Mod Crazy
      • Jan 2012
      • 762

      #3
      Or ngk bcpr7es


      M20B28 Turbo

      My Build Thread

      http://www.r3vlimited.com/board/showthread.php?t=255839

      Comment

      • Q5Quint
        Mod Crazy
        • Jan 2005
        • 725

        #4
        You may need to gap them slightly less than stock if you are running a stock coil, otherwise you will get missing sparks at around 8psi.

        Comment

        • ColdAsLife
          Advanced Member
          • Mar 2013
          • 142

          #5
          NGK BR7ES is sufficient for your target boost. Once you get closer to 18 lbs then usually BR8ES is recommended by most.

          Comment

          Working...