Hi I have a 1984 325E and I recently put a JDM 2jz-gte non vvti in it which is running 18psi and i was wondering what axle upgrades can I do to prevent them from breaking, I do not want to convert to 5 lug as I already have a set of wheels. I have seen that PPM offers a pair but I have read awful reviews on them. Please help me as soon as possible. Thanks in advance.
-
-
What kind of power are you making on 18 psi ? The reason i asked is that you may not need to upgrade, just make sure to get everything new and good quality .. -
I'm in the same boat as you
- 86 eta
- 2jz swap @ 18psi
-4 lug
Don't want to go 5 lug but still want strong axles
I just plan on keeping a few on hand lol
mtech1/2jzgte/r154/275tire
function>formComment
-
I could be wrong but about the only upgrade that would be a direct bolt on is a z3m setup. but that puts you into the 5 lug realm.......and stupid expensive. I don't know your power numbers or what you plan on using the car for, but I have ssen several 500+ hp e30 using stock axles with no issues.sigpic
Rebellion Forge Custom Fabrication
1988 325is - TrackRat in progress
Instagram @rebellionforgeComment
Comment