need a basemap

[red87bimmer]

hey guys im new to turbos and i just baught a set up. i have a stock M20 with a garrett T3/T4 turbo and i need someone to help me out and give me a good basemap for my MSII. i also have 24 LBS injectors. what elts do you guys need to know? thanks alot

[backtrail69]

First off get bigger injectors. Those are good to maybe 7psi. Join up on e30tech.com and read the turbo FAQ in the gen turbo tech section. R3V is a very small turbo community. Most of the people here are stock engines, strokers or 24v..

[red87bimmer]

bigger injectors?? 24 poundes isnt enough for 8psi and im already a member over there ill post something up

[backtrail69]

bigger injectors?? 24 poundes isnt enough for 8psi and im already a member over there ill post something up

32ers are maxed out @ 12. Close to 100% duty cycle to give you an idea. You also want to run at max about 80% duty. I have a set of 60# injectors going into my new motor. Looking at the 1.5 bar (21ish psi) range.