How to remover rev limiter

[Esau]

You re wrong! My M10b18 revs past 7000rpm and with good fuel it also put out some 10 more bhp than stock (Max Power 114bhp at 7250rpm at a local dyno).Removing the rev limiter if you know how to drive properly (ie not over revving like mad every time you step on the throttle) is ok for any bullet proof M10 out there.
Yes,its still no power monster,but also yes,you CAN remove the limiter!
N.

Agreed, If you look up m10 history BMW used them for F1 because the blocks were so bulletproof.

[Jaxx_]

Agreed, If you look up m10 history BMW used them for F1 because the blocks were so bulletproof.

because the motors in F1 were stock...


I'd suggest new rocker arms before you start spinning too high. they're the first to break.

[xwill112x]

not that this thread is relavant anymore but...id remove the redline and see where you can r3v to without breaking shit everytime. the engines are a nickel for 2 dozen anyway.

[Farbin Kaiber]

Oh noes.

[a3ternus]

LOL You re jealous! :P
N.

[Xat1cZ]

LOL You re jealous! :P
N.

Even 3 years later ?

[Wanganstyle]

Agreed, If you look up m10 history BMW used them for F1 because the blocks were so bulletproof.

When did BMW use a M10 for F1?

There is a BMW Motorsports Race only engine called M12; its what was used in the 80's for mega boost F1 and e21 group5.

Notice:

DOHC head
Giant Turbo
GEAR DRIVE conversion
obviously DRY SUMP

[SoopaGhetto]

lol

[oliver.r]

When did BMW use a M10 for F1?

There is a BMW Motorsports Race only engine called M12; its what was used in the 80's for mega boost F1 and e21 group5.

Notice:

DOHC head
Giant Turbo
GEAR DRIVE conversion
obviously DRY SUMP

m12 is a m10 block

[oliver.r]

just run it into a house

[Wanganstyle]

Not really at all.

nothing at all is m10 besides remnants of a iron casting

Sent from my GT-N7100 using Tapatalk 2

[SoopaGhetto]

Not really at all.

nothing at all is m10 besides remnants of a iron casting

Sent from my GT-N7100 using Tapatalk 2

you do realize its pretty much an m10 that is de-stroked, has a dohc head, and boosted? with a little mod i bet you can drop that head on.

just like saying the the s14 is not an m10 besides remnants of an iron casting...you can also drop that head on too with a little mod

[petrolhead]

you do realize its pretty much an m10 that is de-stroked, has a dohc head, and boosted? with a little mod i bet you can drop that head on.

just like saying the the s14 is not an m10 besides remnants of an iron casting...you can also drop that head on too with a little mod

The blocks were used ones, aquired from customers' cars. From BMW 1502s if memory serves.

[Wanganstyle]

The blocks were used ones, aquired from customers' cars. From BMW 1502s if memory serves.

And Highly worked; nothing closed to a stock block.

Even a subaru wrc engine is based off a stock block but fitted with internal liners that cost a fortune, nothing original is kept inside a m12 block.

Simply Bolt on a m12 head??? Not really happening; where does the dohc drive come from and dry sump?

Also the cost of m12 set.........not for r3v mortals.

Sent from my GT-N7100 using Tapatalk 2

[DIIRTY-30]

Talk about grave digging threads.