k-jetronic fuel pressure valve o-rings

[Mr Mpower]

Hi guys,im rebuilding my k-jetronic fuel dist of my 1983 318i e30,and im searching the two little o-rings on the fuel pressure valve of the fuel dist

the two o-rings on the pic


somebody know any online shop to this?
or maybe the o-ring sizes to searh it.
thanks for all guys!

[Hey_You]

Do you have any local auto parts houses (ie: O'rielly's, AutoZone, Napa here in the states)? They usually have a supply of fuel-grade o-rings in stock that you could match up. Other than that, check Pelican Parts as they have lots of parts.

[Mr Mpower]

im from spain and in my city i haven't never of that..
today i've go to a bosch center and nothing to help me..
in ebay i've made some question to some sellers and im waiting..
but for now..nothing.

[40474]

If you take your part to a lubrication/bearings store, they should be able to make the o-rings you require to fit especially. I too have a 1983 e30 318i and am just about to put the 80mm afm on and use the stock fuel distributor. I was thinking about rebuilding it but at this stage I am just hoping for the best. Good luck with your rings.
Travis

[Mr Mpower]

im having a lot of problems with discontinued pieces of the k-jetronic system but i can't find nobody with a k-jetronic delete system and a motronic swap or similar of a m10b18 without k-jet..

[Mr Mpower]

well..im amazing with this shop

http://www.ferrari400parts.com/ferrari400partsshop.php

i've found all parts i need for my k-jetronic..banjo bolts,lines,tools,o-rings,membranes..now i can completely refurbish my k-jetronic system.