S14 itbs on m10?

[E30_Pare]

Shouldn't have those issues in the e30. I see u ran short stacks instead of the s14 bull horns. I suspect just for clearance issues? Thanks 4 the info. I need more!! I was wondering if this setup would still work with the Ljet also. Btw how we're the gains? Was the m10 a 2.0?

[maniacmatt]

Yes, it can be done. A friend of mine is putting s14 throttles on his m10 for his '69 2002 race car. I helped him out with the fabrication.






It was alot of work. And his car posed some unique challenges as his motor is mounted completely vertical not an angle as bmw motors typically are. Essentially I cut the flange off an e30 318i intake and then cut the flange off the s14 throttles and welded them together. Not the easiest thing to do with two pieces of cast aluminum by the way. Because of the way his engine is mounted both pieces were cut on a slight angle to make sure the throttles came straight off the head. Alot of other little things had to be modified but I can't even remember them all.

[E30_Pare]

Doesn't sound like a crazy idea. Is it possible first of all & what would I need to do?! Just a thought.. Anyone want to elaborate?