Spark Plugs for 1984 - 318i

[CarmanNJ]

So what I know is that "WR8DC" are supposed to be the right ones in our cars - the copper ones. However, everyone is selling the "newer" ones - the "Bosch Super". Seems like Bosch has had a change!

Any one have any experience with these - where can I find the original copper ones? Alternatives?

BTW, I searched before posting

[E30 ///Mike]

I have the bosch plugs, they are alright

[Jaxx_]

bosch 7911 should be right thing.

I use Bosch coppers or NGK coppers. they're dirt cheap and take a lot to foul.

[FireFight]

personally i only use NGK, Bosch is ok but there sparks plugs are going down hill and NGK is a better plug
Part Number bpr5es
NGK stocking number 7734

[ZomBAR15]

I run NGK bp6es's in mine. They run great

[nightbear]

bpr6 are a bit tough to get the wrench on in the well, cause they are 20.8mm.. I switched over to bkr6 - they are just the same but for a 16mm wrench.

[Smelser]

We use the Bp6ET very nice