m10b18i problems

[alex23]

Hi chefe , can anyone tell me how to conecta the fuel pressure regulateur ? Where is conected the fuel from the pump ? Where is conectar the line from de regulator to the intake ? And where is conected the the returno fuel line ? Sory my english and thank you for any responde that i might have

[Jaxx_]

If it doesn't run right after you match this photo, swap the fuel pump lines. You can do it at the fuel pump or at the rail

[alex23]

Thank you friend , can i hask onde more thing ? The vacum hoae fromthe distribuidor is conected in the intale right ? And the pressure regulatório is conected in the in the intake right ? I dont havê more places to conecta into da intake :( tonight i take photos and posto here for you can ser . thank you

[alex23]

Hi friends , here i explain my problems

On this photo is marked where i need help



The red circle is de pressure regulateur right ? Where does it conects ?

The green hose where it conects ?

The yellow circle is the distribuitor vauum hose right ? here does it conect ?

And one more question , along the fuel rail near the gear box is de fuel delivery right ?
Thank you for any responses
Forgot to mension is a m10b18i from 84 european without cat

[nightbear]

red and yellow - those are the vacuum hoses, they have to go to the intake manifold.
green is your fuel return - it goes back to your fuel tank.
yes fuel delivery hose goes to the fuel rail near the gear box.