Announcement

Collapse
No announcement yet.

fan hitting rad

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    fan hitting rad

    the only reason i have heard of this happening is engine mounts are gone. how do you go about checking that? please use detail lol, im new to this. also , any other reason the fan may be hitting? I think this may be the only really big problem with the engine in this car.
    cheers and thanks
    Larry

    #2
    easiest at home/limited tools way would to put a wood block on a floor jack and put some pressure on the oil pan. It should be pretty obvious, and most likely the passenger side.

    Comment


      #3
      Make sure your fan shroud is not cracked also. My fan contacted the shroud and snapped three blades off including one into my new rad while i was in traffic on the highway.... I now have ditched it for an electric fan on it's own circuit...
      1988SuperETA|Full I component swap|19lb injectors|Schrick 272|MSIIExtraBeta20071020|GM DIS Wasted Spark|LC-1

      Comment

      Working...
      X