If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
If you are upgrading your ECU to Motronic 1.3, the stock "e" 18# injectors will not work. They are low inpedance and you need the high impedance ones. FWIW, the eta FPR is 2.5 bar, and the i is 3.0 bar. Given the difference in fuel pressure between the two, they flow aproximately the same.
Comment