Sending my engine back to the 80's

[NeoMishMoo]

I am replacing my m20b27 for another one that runs a lot better, before dropping it in I am trying to restore it as best I can without spending over $100.

Here's what I've done so far:
1.Cleaned/polished/painted engine components (valve cover, manifold, thermostat housing).
2.Cleaned spark plug wires & radiatior hoses with wesley's bleach white
3.Cleaning all electrical connectors with QD Electronic cleaner

I still need to clean my injectors, they work fine but they are just very dirty. No local shop cleans and tests injectors & I really don't want to pay $90 to send mine off.

What is the best cheapest way to clean the injectors? Can I just soak them in Carb Cleaner or Seafoam? I really just want to clean them up a bit while I have them out.

Anyone on the forum do injector servicing?

Is there anything else I can do while I have the engine apart and out in the open? Looking for really simple stuff to do, I'm not looking to rebuild the engine or anything.

[leland21]

pop the front cover and check the timing belt out, also the cam shaft seals, the main rear seal, and check the pan for leaks. I know your low budget but if you replaced all these now it would save you a lot of time down the road.

[ben312]

Bavauto sells full reseal kits for a pretty good price.