Stroker Wheel Horespower?????

[Luis325]

Ok I know there are 200 different post about 2.7i strokers...
But none of them with WHP numbers....

My mechanic is building 2 strockers for 2 different cars... One is a stock E bottom end with an I head and all electronics, Jim Comforti chip, 17.5lbs inyectors, IE short tube headers with 2.5 exhaust without cat to a magnaflow muffler, MSD 6al.

Anu idea on the approximate WHP???

The second one is a 2.7e block cut 3mm with E crank and E rods with I pistons...Schrick 284 cam, MSD 6al, BavAuto long tube Headers with 2.5 Exhaust with magnaflow cat, resonator and magnaflow muffler and stock I ecu.With all i electronics. Stock I injectors...

Any ideas on the WHP???

Also which setup do you guys think works better and safer???


Thanks

[red325]

what's a strocker?

[Luis325]

Sorry stroker.....

[SpecM]

the first, maybe 150whp

the second, maybe little more

neither seem to be s-eta sroker, which usually put down 180hp crank, about 160-165whp.

[BigSam]

neither seem to be s-eta stroker

The second one is a 2.7e block cut 3mm with E crank and E rods with I pistons...

Ideal.

[Farbin Kaiber]

I'd say Over Nine Thousand!!!!!!

[theox69]

Only nine?
I think if you strocked it well enough, you might even put out 11k whp

[Philo]

Good thing you spent money where it counts - Exhaust.