Help With Fuel Hose

[Pennyw1se]

I might have accidentally punctured (slightly) the plastic evap hose circled in red. I am assuming this is the hose that comes from the evaporator canister and only fumes are transferred across. Any harm in just wrapping it with duct tape?

[jlevie]

Cut the tubing at the puncture and splice with a short piece of rubber hose. If the hose is a really tight fit on the tubing you won't need any clamps. While that is only a vapor line, gas fumes will dissolve duct tape's adhesive, so that would not be a good fix.

[Pennyw1se]

You are the freakin' man. Im assuming an 8mm hose will work? Ive got plenty of that right now and I'm not at home to check for fitting.
Thanks for the quick answer.

[j0nny5]

u mite wanna get fuel specific hose... i would/did...but how bout splicing to fuel lines together? i used hard plastic vaccum connectors temp,just so i can get car to garage for massive build,couldnt find anything fuel related at good ol autozone,anybody got a better idea? im sick of getting high off gas fumes, lol,windows open and everything and by time i get done im all light headed, wtf,bad high,lol