After about two hundred miles after I completed a head job and after the car sat for a couple of weeks, I decided to take it out for a spin before the seasons ends the vert that it is. Once warmed up the engine is pulsing between 1500 and 2000 RPM. Any ideas?
-
-
vac leaks-Andy
-
Engine pulsating.
Any spots to look at first. Any suggestions as to procedures in attempting to find the leaks. When I put the intake manifold back on I made sure the surfaces were clean and used some RTV silicone.Comment
-
RTV in addition to new gaskets, or just RTV? RTV alone might not result in a seal.
You need to check all the hoses also.The car makes it possible, but the driver makes it happen.
Jim Levie, Huntsville, ALComment
-
Engine pulsating.
All new gaskets. Seems to be a minimal amount of hoses. The big accordion like piece, The hoses connected to the break booster and the one going to the fuel pressure regulator. Am I missing any others?Comment
Comment