I have a head with a broken rocker. I just want to take it somewhere to be inspeceted and fix it anything is wrong. I have new seals that came with the head gasket set. And im hoping they will put them in. About how will this cost you think?
-
-
If you just have them replace the rocker, replace the valve stem seals, and do a leak check, probably less than $200. If you have them do more then it will cost more.1987 E30 325is
1999 E46 323i
RIP 1994 E32 740iL
oo=[][]=oo -
200-300 at the bare minimum before doing anything else. I would look for recommendations on local shops that know bmw heads and call them for estimates.
I had m10 head taken apart, resurfaced and re-assembled with new guides only and it was about $350 total. This was as simple as it gets and gets expensive quick ;)Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827Comment
-
Well im getting it totally redone 300 even !Comment
-
what does 'totally redone' include?Comment
-
all new seals, resurfacing, valve guides, hot tank, "valve job"... cam resurfaceComment
Comment