Anyone know how can i connect an aftermarket tach?
Where can i connect my signal wire and my positive and ground??
Thanks!
Where can i connect my signal wire and my positive and ground??
Thanks!
-
sigpic
1986 "C2 2.7 Alpina" Sedan
1987 325ic Black Vert
1986 327i Red Track Car RIP 10/10/10
1989 325is Henna S50 track car SOLD
Transaction feedback here please!!
http://www.r3vlimited.com/board/showthread.php?t=170548 -
Pick up the tach signal from the wire that supplies said signal to the cluster. Switched power is available from one of the "accessory" fuses next to the fuse box (the other is unswitched). Or you could pick up power from one of the switched supplies to the cluster. Ground can be had in a lot of places, one of which being the main ground point above the steering column.The car makes it possible, but the driver makes it happen.
Jim Levie, Huntsville, AL -
Do you know which wire it its? Color??Originally posted by jlevie View Post
Im still learning on the e30's.....
Thanks!sigpic
1986 "C2 2.7 Alpina" Sedan
1987 325ic Black Vert
1986 327i Red Track Car RIP 10/10/10
1989 325is Henna S50 track car SOLD
Transaction feedback here please!!
http://www.r3vlimited.com/board/showthread.php?t=170548Comment
-
only black wire comming from C1(blue plug on back of cluster) its usually got a shrink wrap like stuff over it.Comment
-
Ok, I'll be the one to ask... WHY?Comment
-
-
maybe he has tarboz and turns 10ksigpicComment
-
Cause Its a race car and I have this...
http://competitionconcepts.com/e30dashinsert.html
And want to run my Tac in the middle......sigpic
1986 "C2 2.7 Alpina" Sedan
1987 325ic Black Vert
1986 327i Red Track Car RIP 10/10/10
1989 325is Henna S50 track car SOLD
Transaction feedback here please!!
http://www.r3vlimited.com/board/showthread.php?t=170548Comment
-
Fuhl raze?
(just messin' with ya)Last edited by george graves; 01-14-2010, 06:50 PM.Originally posted by Matt-BComment
Comment