Announcement

Collapse
No announcement yet.

flywheel bolts

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    flywheel bolts

    Just wondering..are the flywheel bolts for my 5spd one time use only.

    The Build:
    http://www.r3vlimited.com/board/showthread.php?t=191125

    #2
    yes they are stretch bolts and if you follow rules replace the bolts

    Comment


      #3
      The flywheel bolts aren't torque to yield types. If they were the tightening sequence would be an initial torque and turning the bolt through an angle. Best practice is to use new bolts, but they can be re-used. If reusing the bolts thread sealant must be used.
      The car makes it possible, but the driver makes it happen.
      Jim Levie, Huntsville, AL

      Comment


        #4
        Yes there one time use. Don't be cheap. Get new bolts.
        [PAKSIW]
        20D .........
        vmwerks :up:
        ryan gmw :up:

        Comment


          #5
          thanks

          The Build:
          http://www.r3vlimited.com/board/showthread.php?t=191125

          Comment


            #6
            I have put together a LOT of motors and always reuse the flywheel bolts along with red loctite.
            BimmerHeads
            Classic BMW Specialists
            Santa Clarita, CA

            www.BimmerHeads.com

            Comment


              #7
              PS: That includes one of my personal cars which has had 25,000+ miles put on it alone.
              BimmerHeads
              Classic BMW Specialists
              Santa Clarita, CA

              www.BimmerHeads.com

              Comment

              Working...
              X