Help! Im almost done! SETA Stroker Swap Wiring

[r0meyrome]

So Im almost done and ready to start the car and suddenly smoke starts to come out of the fuse box...Here whats I found:

Brown wire number 20 from fusebox insulation is burnt
Red/Yellow wire number 20 on the engine harness is burnt.

With google I found out that red/yellow wire was for ABS on late model harnes...does anyone know how to go about to what I gotta do now? Thanks!

[jlevie]

The first thing to do is to remove the engine harness from the car, open it up, see how bad the damage is. You might have to replace the engine harness. You'll have to do the same with the body side of C101.

When the damage is repaired, clip the wire that goes to pin 20 of C101 before re-connecting the battery.