No spark

[norwood e30]

Ok so I wanted to change ignition wires I found them in my closet plus original wires where getting old. But I put them in wrong firing order then the motor started back firing. Once I put them in correct order the car didn't want to start and I lost spark. What should I look at other than the ecu,ignition coil? Please help somebody

[jlevie]

If the only thing that you've messed with is the ignition wires, I'd suspect that they are still wrong. Pull the wires and put them in in the correct order.

[norwood e30]

Now they are in correct order I'm not getting any spark I'm going to check the crank sensor, starting circuit,ignition rotor, distributor car make sure there is a clean connection. Now someone told me to look at the starter solenoid as well so I guess I'll put that on a check list.

[Adrian_Visser]

Simple logic says the last thing you touched is 99% certain to be the cause of your problem.

[norwood e30]

Simple logic? I put original wires on then put them in correct order in still no spark that's why I ask. If you can't help me then I'll ask someone on e30 tech not trying to be a asswhole but I'm kinda losing it with this car guys lmao. Thank anyway