Announcement

Collapse
No announcement yet.

Knocking...but only between 2500 and 3500

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Knocking...but only between 2500 and 3500

    My engine has an engine-speed related knock. It only occurs when the engine is warm and only between 2500 and 3500. It seems to be coming from right in front of the driver, the back of the motor.

    I put a little 100 octane in there and it seemed to lessen, but didn't go away completely. These things are designed for 91 octane AKI, right? What could it be? I'm not much of a mechanic (yet).

    (sorry, it's a 1991 2.5 "i")
    Last edited by priapism; 11-09-2010, 06:59 PM.
    sigpic
    -Sean : 91 Calypso 325i : Castro Motorsports SoCal Spec E30 #33

    #2
    It would be a help to know what car you have, but all 325e, 325, 325i/is variants are designed for 87 octane. Serious carbon build up in the head could raise the compression ratio, but I doubt it could be enough to cause knocking that only 100 octane would fix. I'd be more suspicious of bad motor/transmission mounts, a flywheel/clutch problem, a rod bearing, or even a drive shaft problem.
    The car makes it possible, but the driver makes it happen.
    Jim Levie, Huntsville, AL

    Comment


      #3
      Originally posted by jlevie View Post
      It would be a help to know what car you have, but all 325e, 325, 325i/is variants are designed for 87 octane. Serious carbon build up in the head could raise the compression ratio, but I doubt it could be enough to cause knocking that only 100 octane would fix. I'd be more suspicious of bad motor/transmission mounts, a flywheel/clutch problem, a rod bearing, or even a drive shaft problem.
      Sorry, it's a 1991 "i". Sounds like it could be anything. I've recently replaced every one of those parts as well as the head. Basket case car argh.
      Last edited by priapism; 11-09-2010, 07:00 PM.
      sigpic
      -Sean : 91 Calypso 325i : Castro Motorsports SoCal Spec E30 #33

      Comment


        #4
        318i? or 325i?
        sigpic

        Comment


          #5
          325...I thought M20 designated the 2.5s?
          sigpic
          -Sean : 91 Calypso 325i : Castro Motorsports SoCal Spec E30 #33

          Comment


            #6
            Originally posted by xwill112x View Post
            318i? or 325i?
            dumbass

            Originally posted by ROLLingKING
            i have a bronzit and plan on making it look sweet.
            Originally posted by slammin.e28
            Moral of this story?

            If you drive your e30 on stairs, you're gonna have a bad time.

            Comment


              #7
              Originally posted by accident View Post
              dumbass

              jackass.^



              I was just trying to help..jesus..
              sigpic

              Comment


                #8
                you're in the fucking M20 subsection, obviously it's not a 318.

                Originally posted by ROLLingKING
                i have a bronzit and plan on making it look sweet.
                Originally posted by slammin.e28
                Moral of this story?

                If you drive your e30 on stairs, you're gonna have a bad time.

                Comment


                  #9
                  does it knock when under a load or just cruising? milage?
                  sigpic

                  Comment


                    #10
                    Now now kids, play nice. :)

                    Originally posted by xwill112x View Post
                    does it knock when under a load or just cruising? milage?
                    Seems to only do it under light throttle, but when I'm on it it goes through those RPMs pretty quick so it's hard to say. Can't hear it at speed over the wind noise.
                    sigpic
                    -Sean : 91 Calypso 325i : Castro Motorsports SoCal Spec E30 #33

                    Comment


                      #11
                      if under light throttle and coasting could be your rod(s) knocking.

                      how many miles are on the m20?
                      sigpic

                      Comment


                        #12
                        Odo shows 155k, it was working when I got it...

                        Guess this is a job for the shop.
                        sigpic
                        -Sean : 91 Calypso 325i : Castro Motorsports SoCal Spec E30 #33

                        Comment

                        Working...
                        X