Who has an answer to this !!!!!!!!!

[ATL e30]

Ok so I got stock 325i and want to get an cold air intake but all I've been seeing are filters for them. Does anyone make a filter and pipe kit for that car to fit the standard MAF that's on the car.

If anyone out there has one post a photo and show what you got and how you making it work for you.

"E30 forever"

[10Toes]

Yeah they make adaptors that will fit the AFM. Most filter kits that are made for E30's should include them.

[ATL e30]

Saw that one on eBay. I also saw a pipe that came from the MAF to the intake manifo but eBay can't be the only place to get such a thing right ?

[jlevie]

I'd say not to waste your money on this. The stock airbox (if all parts are in place) pulls cold air. And it's performance is so good that an aftermarket CAI won't increase performance of the engine. Keep a clean filter in it and you are "good to go".

[Bimmerista]

Just as Jim says, complete waste of money. Its an ideal "ricer" mod though if you're into that sort of thing.

[ATL e30]

Coool the way it looking I'll end up doing that. What I did want tho was a cleaner look area on that side.

[deutschman]

http://r3vlimited.com/board/showthread.php?t=130323&highlight=cold+air+intake

[mr.vang]

drop in a K&N air filter panel. afe prodry is a non-oil drop in filter and they are washable.

[ATL e30]

That sounds like a plan.

[ATL e30]

I've seen that kamotors in take before who is running that on their car now or has done ?

[KillaCams]

I've got the older style KA motors intake with the cone filter and heat shield, not sure how much hp was gained, butt dyno feels some gains and it sounds cool.

[ATL e30]

@ kills where did you get your hear shield from.

[Easily Distracted]

Our cars have air flow meters not mass air flow like on later BMWs. This could be important if ordering a cone filter adapter.

[ATL e30]

Our cars have air flow meters not mass air flow like on later BMWs. This could be important if ordering a cone filter adapter.

what makes them different ?

[E30_pilot]

just get a drop in kn filter and drill holes into the bottom of your airbox. sounds sweet and works better than any cone filter