not starting now..need some help

[24v325is]

i drove my car into the garage to put new plug wires in last night. installed the new wires nd then it wouldnt start. its cranking nd its getting spark to the plugs nd i checked the placement of the wires on the cap like 5 times. nd the wires are all goin to the right plug. idk i cant figure it out. is there anything im missing. im not retarded i can do plug wires.. idk wat the problem is. can anyone help me out?? its an 87 325is btw

[Bene]

did you forget the coil wire?

[24v325is]

nah i did that too. nd i forgot to mention that its sounds different wen its cranking now. idk how to explain it buts its just not the normal sound.

[MTechnikII]

check one more time
also make sure thespark plugs are tight , and just to be sure open the oil cap and have somone crank the engine and look inside see if the camshaft is spinning
did you connect the correct spark plug wires to the corrrect sparkplug?
check the numbers on the wire with the sparkplug number
Henry

[24v325is]

ya ive done all this except make sure the cam is spinning. ill check everything again tho nd check the cam

[MTechnikII]

I hope it's spinning, otherwise it's the timing belt,